T1013 EAGLE 1.3 GHz 500mW-1000mW FPV TRANSMITTER (US VERSION)

Eagle-T1013LRTx-US

New product

The new T1013 Eagle long range transmitter has been completely redesigned and tailored for FPV with a handful of improvements, such as: new switching regulator, ceramic high efficiency low profile heat sinks, high quality audio channel, runs 50% cooler than its previous model, lower profile, 10 grams lighter and overall better performance.

More details

$95.00

Add to wishlist

More info

It's a power house, providing a 500/1000 milliwatts of pre RF output. It is the best transmitter for long range applications. Even with all that power, it weights only around 0.8oz (25grams). With all this, and the right setup, for sure you can get video reception miles away. It is highly recommended to install the transmitter in ventilated areas, to allow the air to keep it cool. As any of our transmitters, the Eagle has digital Phase-Lock-Loop circuit avoiding frequency drift, providing a stable and solid audio and video delivery. You can not go wrong with it.    

Features:
500/1000mW RF output power
(2) User-selectable US channels (1258 MHz and 1280 MHz)
1.3 GHz frequency band
Works with any camera PAL or NTSC
Digital Phase-Lock-Loop circuit no drifting problem 
Works with any of our receivers
Audio and Video cable with RCA adapter
Highly integrated circuit
High reliability/linearity/AIGaAs/GaAs FET amplifier module
Uses digital phase-lock-loop circuit without temperature drifting problem
Weight: 30g (transmitter only)

Specifications:  
Output power 50-ohm load CH1 Vcc = 12V: 30dBm (1000mW)
Nominal output impedance: 50 ohms
Operating voltage: Vcc, 10.5V (minimum), 12V (typical), 13V (maximum)
Supply current Vcc = 12V: 350mA (typical), 400mA (maximum)
Video input voltage 75-ohm impedance: 1Vp-p
Audio input voltage 10k ohm impedance: 1Vp-p
Sub carrier frequency: 5.5MHz
Operation temperature: -10 to 40 degrees Celsius
Storage temperature: -40 to 80 degrees Celsius
Operating humidity: 20 to 80%
Storage humidity: 10 to 80%
Dimensions and weight: 50 x 26 x 11mm, 0.93oz (26g) (without antenna)
Standard shipping package:
1.3 GHz 500/1000mW AV transmitter (Lawmate's replacement)
SMA type dipole antenna x 1
Jack connector to RCA AV input and power input cable x 1

Channel 1: 1200 MHz  (Not available for US customers)
Channel 2: 1220 MHz  (Not available for US customers)
Channel 3: 1240 MHz  (Not available for US customers)
Channel 4: 1258 MHz  (US Channel)
Channel 5: 1280 MHz  (US Channel)
Channel 6: 1300 MHz  (Not available for US customers)
Channel 7: 1320 MHz  (Not available for US customers)
Channel 8: 1340 MHz  (Not available for US customers)

Package Includes:

  • 1x Eagle 1.3 GHz 500/1000mW AV transmitter
  • 1x SMA type dipole antenna x 1
  • 1x Jack connector to RCA AV input and power input cable x 1

Disclaimer: ElectrifyRC is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.