T1013 PRO 1.2 - 1.3 GHZ 0.5-1W FPV TRANSMITTER (INT)


New product


Add to wishlist

More info

The new T1013 Pro Version 1.3 GHz transmitter is better than ever! Following the same performance of its older brother T1013 Plus V2 transmitter, the T1013 Pro version comes in a new lighter weight and smaller aluminum case (14g less than V2), making it a perfect fit for projects where space and weight are concerns.

You still get the 500/1000 miliwatts of switchable pre RF output and it continues to be the best transmitter for long range applications. (for RC models is recommended to install the T1013 Pro as far as possible away from the models receiver). This new version is 45% lighter weighing only 0.5 ounces (16 grams). With all this, and the right antenna setup, for sure you can get video reception miles away. It is highly recommended to install the transmitter in ventilated areas, to allow the air to keep it cool. As any of our transmitters, T1013 Pro has digital Phase-Lock-Loop circuit avoiding frequency drift, providing a stable and solid audio and video delivery. You can not go wrong with it.    


  • 500/1000 mW RF output power
  • (8) User-selectable channels (1200, 1220, 1240, 1258, 1280, 1300, 1320, 1340 MHz)
  • 1.3 GHz frequency band
  • Works with any camera PAL or NTSC
  • Digital Phase-Lock-Loop circuit no drifting problem 
  • Works with any of our receivers
  • Audio and Video cable with RCA adapter
  • Highly integrated circuit
  • High reliability/linearity/AIGaAs/GaAs FET amplifier module
  • Uses digital phase-lock-loop circuit without temperature drifting problem
  • Weight: 16g (transmitter only)


  • Output power 50-ohm load CH1 Vcc = 12V: 30dBm (1000mW)
  • Nominal output impedance: 50 ohms
  • Operating voltage: Vcc, 10.5V (minimum), 12V (typical), 13V (maximum)
  • Supply current Vcc = 12V: 350mA (typical), 400mA (maximum)
  • Video input voltage 75-ohm impedance: 1Vp-p
  • Audio input voltage 10k ohm impedance: 1Vp-p
  • Sub carrier frequency: 5.5MHz
  • Operation temperature: -10 to 40 degrees Celsius
  • Storage temperature: -40 to 80 degrees Celsius
  • Operating humidity: 20 to 80%
  • Storage humidity: 10 to 80%
  • Dimensions and weight: 37 x 27 x 12.25mm, 0.21oz (16g) (without antenna)

Package Includes:

  • 1.3 Pro Version GHz 500/1000mW AV transmitter
  • SMA type dipole antenna x 1
  • Jack connector to RCA AV input and power input cable x 1

Disclaimer: ElectrifyRC is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.